DX8602 Plastic Ignition Temperature Tester

The main technical parameters of the DX8602 ignition temperature tester are:

Customized ceramic tubes with an inner diameter of 100mm ± 5mm, a length of 240mm ± 20mm, and a temperature resistance of not less than 750 ℃;

The inner diameter of the inner tube is 75mm ± 2mm, the length is 240mm ± 20mm, and the temperature resistance is not less than 750 ℃;

The flame height of the butane igniter can be adjusted arbitrarily from 10mm to 20mm;

The temperature inside the furnace can remain constant at any temperature between (150-750) ℃;

Equipped with a flow meter to accurately control gas flow rate;

The insulation layer is composed of insulation mineral wool with a thickness greater than 60mm, and is wrapped with stainless steel on the outside;

Three thermocouples and temperature instruments are used to detect the temperature inside the furnace and the temperature of the sample;

The sample container is made of stainless steel;

Timer accuracy of 0.01s, time recording range: 0-999.9S (preset);

Automatic temperature control program;

Environmental temperature: room temperature~40 ℃; Environmental humidity: ≤ 75%;

Working voltage: AC 220 V±10V 50Hz; Operating power: 2500W;

Temperature control accuracy:±2℃, can be adjusted freely between 150℃ and 750℃;

Display accuracy: ±0.5 ℃;

Equipment dimensions: Test furnace400×250× 300, controller length 430×350×280mm

Equipment weight: 15Kg.

plastic ignition temperature tester

DX8602 plastic ignition temperature tester

DX8602 Plastic Ignition Temperature Tester Images